PRODUCTS

PET (PLASTAR)

PETG SHEET

Product features

  • Mechanical features
    Superior impact resistance

  • Functional features
    Excellent printability, excellent chemical resistance

  • Optical features
    Excellent light transmittance, superb surface gloss

  • Eco-friendly features
    Does not include harmful material

  • Economic features
    Easy fabrication (Excellent thermoforming)

Vending machinesVending machines

Sign boards

Sign boards

Vending machines

Helmets

Properties of PETG

Properties Test method Unit Value Unit Value
Physical
properties		 Specific gravity ASTM D792 - 1.27 - 1.27
Refractive index ASTM D542 % 0.1 % 0.1
Optical
properties		 Total light
transmittance		 ASTM D1003 % 88.9 % 88.9
Haze ASTM D1003 % 0.9 % 0.9
Tensile strength Elongation rate ASTM D638 Psi 7832 Mpa 54
Elongation rate ASTM D638 % 29 % 29
Curve Strength ASTM D790 Psi 11269 Mpa 77.7
Curve Elasticity ASTM D790 Psi 310381 Mpa 2140
Izod impact strength (Notched) ASTM D256 ft-lb/in 12.0(P) J/m 642.3(P)
Rockwell hardness ASTM D785 R Scale 122 R Scale 122
Thermal
properties		 Load Deformation temperature ASTM D525 156 ℉ 69 ℃
Vicat softening temperature test ASTM D 525 185 ℉ 85 ℃
  • The above data is representative value only, not to be used for warranty or claim.

APET SHEET

Product features

  • Transparency (gloss surface))
    Transparent film has high transparency to give good flatness and glossiness.

  • Electrical resistance
    Used typically as insulation material for electrical parts (connector and adapter etc.) as it has good electric insulation; it also has excellent moisture/water resistance.

  • Tensile strength
    One of The best tensile strength & Elongation among the plastic films is PET film – Has few size change in the temperature range 70℃~150℃.

  • Chemical resistant
    Show stability against most of the chemical agents except strong alkaline agents, chemicals do not get infiltrated.

  • Impact resistant
    Does not break compared to glass and acrylic sheets, so it can be down gauged;
    remains strong in low temperature under –40℃, can be used in wide ranges from buildings to electronics.

  • Flexibility (Bending)
    Can be bended without heat; when bending on the back layer with heat, can be bended without chalking two times faster than acrylic bending.

  • Formability
    Plasticizer or stabilizer is not required when producing, safe and no harm to the human body.

Classification Item Color Spec. unit : mm Properties
Sheet / Roll APET Clear

Thickness : 0.3mm~2mm


Width : Sheet 850mm~1,280mm

length : Order made

  • Sheet - 2,000/2,440mm

Other spec, contact
Download

Applications

Poster clear cover

Clear clamshell packaging