PRODUCTS

PO Coating film

TAJO PO COATINGOUT LAYER

Developed with own blending technology, it is an agricultural PO Coating film
customized and to meet the requirements from the local greenhouses.

Product Features

  • 01

  • Super-hydrophilic nano-coating developed with our own technology is added.

  • 02

  • Excellent durability on Anti-drip & Anti-fog by special performance coating to inner layer is guaranteed.

  • 03

  • High transparency film allows more efficient photosynthesis and healthy leaves.

  • 04

  • Heating bill is reduced by better heat retainablity, and 5 layers of film structure ensure its strength.

5 layer film construction

Excellent performance on Strength, weatherability & heat retainablity

National Research Institute comparison

Evaluation items Tajo® Coating Other EVA-based Film Japanese PO film Properties
Photosynthesis
light transmittance (%)		 89.0 81.8 87.7
Download
UV transmittance (%) 85.8 84.8 66.8
Temperature increase in night 0.2 ~ 0.5↑ - 0.2 ~ 0.5↑
Heating cost saving (%) 13 - 13
Crops growth (%) 10 ~ 15 - 10 ~ 15
  • Test Institution : National Institute of Horticultural & Herbal Science, facility horticultural testing center
  • Test crops : Strawberries, Korean melon, tomato, red pepper, lettuce

Product standards

Thickness (mm) Use Remark
0.08 For out layer only Produce up to 460cm fold width.
0.10 Above 460cm fold width is seamed.
0.12
0.15
  • Optimized for single layer greenhouse with a high gradient (ceiling angle should exceed 25degree)
  • Anti-fog function can be limited by many conditions like installation site, altitude, humidity and etc)
  • Film life is under normal use and conditions. Do NOT use inappropriate materials, PVC pipes, rusted pipes, fumigation or pesticides.

TAJO DIFFUSING FILMINLAYER & OUT LAYER

Light diffusion effect added on the film of PO coating, PO addition, and EVA high performed PO.

Name of Product

(Patent no.: 10-1468141)

TAJO COATING DIFFUSION

Coating Type PO

ULTRA DIFFUSION

Addition Type PO

DAJOA DIFFUSION

EVA high performed PO

Product Features

  • 01

  • Reduction of shadows in the greenhouse by light diffusion will help balanced growth of crops.

  • 02

  • Rapid temperature rise in the greenhouse from direct sunlight and crops scorch will be prevented.

  • 03

  • Inorgnic ingredient blocks the radiant energy and keep the greenhouse warm during night time.

  • 04

  • Transmitance looks low, but sunlight trasmition rate is same as the ordinary clear film.

Product specification

Item name Thickness(mm) Width(cm) Life cycle Applications
Tajo Coating Diffusion 0.1 200-900 3years Outlayer
Ultra Diffusion 0.5-0.15 200-820 1years Out & inlayer
Dajoa Diffusion 0.08-0.15 200-820 Thick0.08: 1yr
Thick0.1: 2yr		 Outlayer
  • Optimized for single layer greenhouse with a high gradient (ceiling angle should exceed 25degree)
  • Anti-fog function can be limited by many conditions like installation site, altitude, humidity and etc)
  • Film life is under normal use and conditions. Do NOT use inappropriate materials, PVC pipes, rusted pipes, fumigation or pesticides.
Test items Test Method Units Values Properties
Light transmission in PAR ASTM D 1003 % 87
Download
Diffused light transmission in PAR % 45
Light transmission in IR % 33
Anti drip Place in accordance to instruction Yes
Anti mist Place in accordance to instruction Yes

Technology information

Light is diffused in the greenhouse to make the temperature 2-3 Celsius degrees lower compared to other ordinary PE film measured within the same time.
diffusion effect prevents the direct sunlight in the greenhouse to give less stress to the crops.

Cautions for Coating film

Please read the product manual of the agricultural PO long-term TAJO® Coating Film before installation to greenhouse.
(Do not use the film for other purpose or use)

User guide [Cautions]

Greenhouse film has different functions inside and outside, so be sure to install it so that the letters printed on the film surface can be
seen correctly from the outside of the greenhouse.

House Film should not be scratched by dragging to the ground or rusted pipe. The coating surface could be damaged, and it will lead film
tearing and inferior performance on anti-drip effect.

Do not get the product wet, and store it in a cool and shaded place as there is a risk of film sticking when stored in a hot and humid place.

When installing, apply the pad film to prevent damage from the pad spring.

The house film can get damaged often during installation of side window or ventilator. Proper installation must be taken to avoid film damage.

Do not stretch the film on hot days as it will contract when cool and may weaken, and if it is too loose, it will cause wrinkles and deteriorate
anti-dripping effect.

Winkle or twist by improper installation causes inferior anti-drip effect, and lanyard should be installed loosely to avoid winkle on the film.

Ceiling angle should exceed 25degree for smooth water sliding.

Improper material, sulfur, fumigation, sulfur base or chloride base agents, affect the shortening the life span.

Some water forming and dropping at early installation. But after sufficient moisture is supplied in 1-2 months, the coating layer becomes
becomes stabilized and activates anti-drip effect in the greenhouse.

When installing film on the greenhouse, more than 2 people must carry and not drag the film on the ground. Spread the film alongside
the greenhouse and make sure the film faces correct way according to the user guide.

When the film is seamed, the anti-drip effect is deteriorated on this part. The seamed area should be concerned and placed properly
when installing in the greenhouse.

TAJO® coating must be applied as only out layer film at greenhouse. Do not use it for inner layer and water screen greenhouse in the case
of double layer greenhouse.

Take a caution when handling and moving. Do not hold the strings on the package bands when moving them.
The strings on the package bands could be got cut off due to its heavy weight, and the heavy box falling into you causes injure or fracture.